|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
(R) STP45N10 STP45N10FI N - CHANNEL 100V - 0.027 - 45A - TO-220/TO-220FI POWER MOS TRANSISTOR TYPE STP45N10 STP45N10FI V DSS 100 V 100 V R DS(on) < 0.035 < 0.035 ID 45 A 24 A s s s s s s s s TYPICAL RDS(on) = 0.027 AVALANCHE RUGGED TECHNOLOGY 100% AVALANCHE TESTED REPETITIVE AVALANCHE DATA AT 100oC LOW GATE CHARGE HIGH CURRENT CAPABILITY 175 oC OPERATING TEMPERATURE APPLICATION ORIENTED CHARACTERIZATION 3 1 2 1 2 3 TO-220 ISOWATT220 APPLICATIONS HIGH CURRENT, HIGH SPEED SWITCHING s SOLENOID AND RELAY DRIVERS s DC-DC & DC-AC CONVERTERS s AUTOMOTIVE ENVIRONMENT (INJECTION, ABS, AIR-BAG, LAMP DRIVERS. Etc.) s INTERNAL SCHEMATIC DIAGRAM ABSOLUTE MAXIMUM RATINGS Symbol Parameter STP45N10 V DS V DGR V GS ID ID IDM (*) P tot V ISO T stg Tj June 1998 Drain-source Voltage (V GS = 0) Drain- gate Voltage (R GS = 20 k) Gate-source Voltage Drain Current (continuous) at T c = 25 C Drain Current (continuous) at T c = 100 C Drain Current (pulsed) Total Dissipation at T c = 25 o C Derating Factor Insulation Withstand Voltage (DC) Storage Temperature Max. Operating Junction Temperature o o Value STP45N10FI 100 100 25 45 32 180 150 1 -65 to 175 175 24 17 180 45 0.3 2000 Unit V V V A A A W W/ o C V o o C C 1/10 STP45N10/FI THERMAL DATA TO220 R thj-case R thj-amb R thc-sink Tl Thermal Resistance Junction-case Max 1 62.5 0.5 300 ISOWATT220 3.33 o o o C/W C/W C/W o C Thermal Resistance Junction-ambient Max Thermal Resistance Case-sink Typ Maximum Lead Temperature For Soldering Purpose AVALANCHE CHARACTERISTICS Symbol I AR E AS Parameter Avalanche Current, Repetitive or Not-Repetitive (pulse width limited by T j max, < 1%) Single Pulse Avalanche Energy (starting T j = 25 o C, I D = I AR , VDD = 25 V) Max Value 45 400 Unit A mJ ELECTRICAL CHARACTERISTICS (Tcase = 25 oC unless otherwise specified) OFF Symbol V (BR)DSS I DSS Parameter Drain-source Breakdown Voltage Test Conditions I D = 250 A V GS = 0 Min. 100 10 1 50 100 Typ. Max. Unit V A A mA Zero Gate Voltage V DS = Max Rating Drain Current (V GS = 0) V DS = Max Rating x 0.8 V DS = Max Rating x 0.8 Gate-Source Leakage Current (V DS = 0) V GS = 20 V T c = 125 o C I GSS ON () Symbol V GS(th) R DS(on) ID(on) Parameter Gate Threshold Voltage Static Drain-source On Resistance V DS = VGS V GS = 10 V V GS = 10 V Test Conditions I D = 250 A I D = 22.5 A I D = 22.5 A T c = 100 o C 45 Min. 2 Typ. 3 0.027 Max. 4 0.035 0.07 Unit V A On State Drain Current V DS > I D(on) x R DS(on)max V GS = 10 V DYNAMIC Symbol g fs () C iss C oss C rss Parameter Forward Transconductance Input Capacitance Output Capacitance Reverse Transfer Capacitance Test Conditions V DS > I D(on) x R DS(on)max V DS = 25 V f = 1 MHz I D = 22.5 A V GS = 0 Min. 20 Typ. 40 4100 600 150 5200 800 220 Max. Unit S pF pF pF 2/10 STP45N10/FI ELECTRICAL CHARACTERISTICS (continued) SWITCHING ON Symbol t d(on) tr (di/dt)on Qg Q gs Q gd Parameter Turn-on Time Rise Time Turn-on Current Slope Total Gate Charge Gate-Source Charge Gate-Drain Charge Test Conditions V DD = 50 V A R G = 4.7 V DD = 80 V R G = 47 V DD = 80 V I D =45 A I D = 22.5 V GS = 10 V I D = 45 A V GS = 10 V V GS = 10 V 400 120 20 50 170 A/s nC nC nC Min. Typ. 25 75 Max. 35 105 Unit ns ns SWITCHING OFF Symbol t r(Voff) tf tc Parameter Off-voltage Rise Time Fall Time Cross-over Time Test Conditions V DD = 80 V R G = 4.7 I D = 45 A V GS = 10 V Min. Typ. 30 35 65 Max. 45 50 95 Unit ns ns ns SOURCE DRAIN DIODE Symbol I SD I SDM (*) V SD () t rr Q rr I RRM Parameter Source-drain Current Source-drain Current (pulsed) Forward On Voltage Reverse Recovery Time Reverse Recovery Charge Reverse Recovery Current I SD = 45 A I SD = 45 A V DD = 30 V V GS = 0 di/dt = 100 A/s o T j = 150 C 200 0.14 14 Test Conditions Min. Typ. Max. 45 180 1.5 Unit A A V ns C A () Pulsed: Pulse duration = 300 s, duty cycle 1.5 % (*) Pulse width limited by safe operating area Safe Operating Area for TO-220 Safe Operating Area for ISOWATT220 3/10 STP45N10/FI Thermal Impedance for TO-220 Thermal Impedance for ISOWATT220 Derating Curve for TO-220 Derating Curve for ISOWATT220 Output Characteristics Transfer Characteristics 4/10 STP45N10/FI Transconductance Static Drain-source On Resistance Gate Charge vs Gate-source Voltage Capacitance Variations Normalized Gate Threshold Voltage vs Temperature Normalized On Resistance vs Temperature 5/10 STP45N10/FI Turn-on Current Slope Turn-off Drain-source Voltage Slope Cross-over Time Switching Safe Operating Area Accidental Overload Area Source-drain Diode Forward Characteristics 6/10 STP45N10/FI Fig. 1: Unclamped Inductive Load Test Circuit Fig. 2: Unclamped Inductive Waveform Fig. 3: Switching Times Test Circuits For Resistive Load Fig. 4: Gate Charge test Circuit Fig. 5: Test Circuit For Inductive Load Switching And Diode Recovery Times 7/10 STP45N10/FI TO-220 MECHANICAL DATA DIM. MIN. A C D D1 E F F1 F2 G G1 H2 L2 L4 L5 L6 L7 L9 DIA. 13.0 2.65 15.25 6.2 3.5 3.75 0.49 0.61 1.14 1.14 4.95 2.4 10.0 16.4 14.0 2.95 15.75 6.6 3.93 3.85 0.511 0.104 0.600 0.244 0.137 0.147 4.40 1.23 2.40 1.27 0.70 0.88 1.70 1.70 5.15 2.7 10.40 0.019 0.024 0.044 0.044 0.194 0.094 0.393 0.645 0.551 0.116 0.620 0.260 0.154 0.151 mm TYP. MAX. 4.60 1.32 2.72 MIN. 0.173 0.048 0.094 0.050 0.027 0.034 0.067 0.067 0.203 0.106 0.409 inch TYP. MAX. 0.181 0.051 0.107 A C D1 L2 F1 D G1 E Dia. L5 L7 L6 L4 P011C L9 8/10 F2 F G H2 STP45N10/FI ISOWATT220 MECHANICAL DATA DIM. MIN. A B D E F F1 F2 G G1 H L2 L3 L4 L6 L7 O 28.6 9.8 15.9 9 3 4.4 2.5 2.5 0.4 0.75 1.15 1.15 4.95 2.4 10 16 30.6 10.6 16.4 9.3 3.2 1.126 0.385 0.626 0.354 0.118 mm TYP. MAX. 4.6 2.7 2.75 0.7 1 1.7 1.7 5.2 2.7 10.4 MIN. 0.173 0.098 0.098 0.015 0.030 0.045 0.045 0.195 0.094 0.393 0.630 1.204 0.417 0.645 0.366 0.126 inch TYP. MAX. 0.181 0.106 0.108 0.027 0.039 0.067 0.067 0.204 0.106 0.409 A B L3 L6 L7 F1 D H F G1 E F2 123 L2 L4 P011G G 9/10 STP45N10/FI Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specification mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a trademark of STMicroelectronics (c) 1998 STMicroelectronics - Printed in Italy - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - France - Germany - Italy - Japan - Korea - Malaysia - Malta - Morocco - The Netherlands Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A. . 10/10 |
Price & Availability of STP45N10 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |